-
Hot tapping equipmentAbstract：
Hot tapping equipment is used to allow entry into pressurized systems to either vent the pressure or perform other remedial work after allowing an entry port for pumping operations
Details
Hot tapping equipment is used to allow entry into pressurized systems to either vent the pressure or perform other remedial work after allowing an entry port for pumping operations, freezing operations or other well intervention.
Specifications:
| Pressure rating: | 35Mpa(5000PSI) |
| OD： | 11.43cm(4.5”) |
| Length： | 236.22cm(93”) |
| Weight： | 53kg |
| Pipe range： | 2-3/8”,2-7/8”,3-1/2” |
| Max. drill length: | 90cm (35.4”) |
| Min. drill bit size: | 6.35mm(0.25”) |
| Max hole saw cut | 152.4mm(6”) |
| Max. RPM | 200rpm |
| Saddle Clamps and Valves | Various sizes by job scope. |
