-
Pipe Pick-up&LaydownAbstract：
Top-Well’s PULD crew has been conducting more than 2 years of PULD services for Chevron CDB project in Sichuan which is high H2S content gas well development with full client satisfaction.
Details
Introduction of Pick up-Lay down (PULD) machine Model MCPLHL50
PICKUP/LAYDOWN MACHINE SPECIFICATIONS
Cable and trough style
Dimensions: 20’ L x 8’6” W (without truck)
Weight: 26,896 lbs (12,200kg)
Unit requires: 100 GPM with 200 HP engine
Winches: 7/8” cable (large) 50,000 lbs pull capacity
5/8” cable (small) 30,000 lbs pull capacity
Anchor Pole: 30’ L with stabilizing leg
Trough dimensions: Varies
Note: Maximum available trough diameter is 24” to handle 20” casing.
Operator’s Cab is fully self-contained with all hydraulic controls
Hydraulic system is open center with 180 gallon reservoir
PICKUP/LAYDOWN MACHINE CAPACITIES
Maximum trough capacity: 6,000 lbs (2,722 kg)
Maximum casing size: 13 3/8”
Cycle time: 20 seconds (every 20 seconds a tubular can be at the rig floor)
PICKUP/LAYDOWN TRUCK SPECIFICATIONS
Minimum 300 HP
100 GPM hydraulic pump PTO driven
40,000 lb tandem dual wheeled drive axles
12,000 lb single front axle
Cab to axle required: 144”
Advantages of using PULD Machine
More efficient way of transfer tubing, casing, drill pipe up and down the rig floor (cycle time is only 20 seconds).
Safer for rig crew and rig equipment by eliminating the usage of crane.
Protects CRA pipe from contacting with iron during pipe transfer.
Quick mobilization and demobilization between rig to rig by using truck mounting unit.
Quick rig up and rig down ( 2 hours for rigging up, and 1.5 hours for rigging down)
Top-Well’s PULD crew has been conducting more than 2 years of PULD services for Chevron CDB project in Sichuan which is high H2S content gas well development with full client satisfaction.
PICKUP/LAYDOWN MACHINE SPECIFICATIONS
Cable and trough style
Dimensions: 20’ L x 8’6” W (without truck)
Weight: 26,896 lbs (12,200kg)
Unit requires: 100 GPM with 200 HP engine
Winches: 7/8” cable (large) 50,000 lbs pull capacity
5/8” cable (small) 30,000 lbs pull capacity
Anchor Pole: 30’ L with stabilizing leg
Trough dimensions: Varies
Note: Maximum available trough diameter is 24” to handle 20” casing.
Operator’s Cab is fully self-contained with all hydraulic controls
Hydraulic system is open center with 180 gallon reservoir
PICKUP/LAYDOWN MACHINE CAPACITIES
Maximum trough capacity: 6,000 lbs (2,722 kg)
Maximum casing size: 13 3/8”
Cycle time: 20 seconds (every 20 seconds a tubular can be at the rig floor)
PICKUP/LAYDOWN TRUCK SPECIFICATIONS
Minimum 300 HP
100 GPM hydraulic pump PTO driven
40,000 lb tandem dual wheeled drive axles
12,000 lb single front axle
Cab to axle required: 144”
Advantages of using PULD Machine
More efficient way of transfer tubing, casing, drill pipe up and down the rig floor (cycle time is only 20 seconds).
Safer for rig crew and rig equipment by eliminating the usage of crane.
Protects CRA pipe from contacting with iron during pipe transfer.
Quick mobilization and demobilization between rig to rig by using truck mounting unit.
Quick rig up and rig down ( 2 hours for rigging up, and 1.5 hours for rigging down)
Top-Well’s PULD crew has been conducting more than 2 years of PULD services for Chevron CDB project in Sichuan which is high H2S content gas well development with full client satisfaction.
